Mould Removal

Expert Mold Removal and Cleanup

Contaminant removal and On-site mould removal

Mold Removal Process

  1. Site Preparation
  2. Containment and Negative Air Pressure
  3. Remove Unrecoverable Materials Safely
  4. Dry and Clean Remaining Materials
  5. Biocide Spray Treatment
  6. Cleanup Checks
  7. Material Removal and Final Cleanup

Overall Goals of Removal and Remediation

Causes Identified and Repaired –  We first identify and repair the structural defect, mechanical failure, or environmental condition that caused the mold growth to begin with.

​Visible Problems Removed – All mold contaminated building materials that cannot be completely cleaned and reused are removed to a distance 2’ beyond all visible contamination. Depending on the extent of the contamination – containment, negative air generation and HEPA air filtration/ vacuuming may take place during this process.

Odour Removed – Mycotoxin is a byproduct of mold growth and causes the odours commonly associated with mould contamination. Complete removal combined with an approved biocide application effectively removes odours.

Testing Suitability For Occupancy​ – Clearance Testing is done to insure the environment is suitable for re-occupancy.